AddExternalDataLayer |
Create an External Data Layer with given name.
|
AddPictureLayer(Bitmap, String, Boolean) |
Adds an PicuteLayer to the current ODB++ Job.
Image will be cloned, please dispose yours.
|
AddPictureLayer(String, String, Boolean) |
Adds an PicuteLayer to the current ODB++ Job.
|
AddPictureLayer(String, String, Boolean, Boolean, Boolean) |
Adds an PicuteLayer to the current ODB++ Job.
|
AddUndoItem |
Add own undo item, this is added in the undo stack and will be handled if user clicks on undo or use shortcut Control+Z.
|
BanEditJobItems |
OBSOLETE: not used any more
|
CallHostChangeButton |
Change button check type.
|
CallHostChangeEnable |
Change enable for action item.
|
CallHostChangeVisible | |
CleanUpSymbolDirectory |
Check all used odb symbols and clean symbol directory. This load all layer and check if there is a reference on an odb symbol.
|
ClearUndoBuffer |
Clear the inner undo buffer.
This make it impossible to undo mirror/rotation and many more actions.
|
ClientToWorld |
Calculate client to world coordinates.
|
ClientToWorldD |
Calculate client to world coordinates.
|
CloseJob |
Close the current job! The project directory will be unloaded and all used RAM will be disposed.
This is not necessary if you close a new project/job the RAM cleaning will be done as well.
|
CreateNewJobDirectory(String) |
Creates a new job directory and returns the right path (with SubFolder).
The name is allways gerber_job.
Existing folders are overwrited.
/// |
CreateNewJobDirectory(String, String, String) |
Creates a new job directory and returns the right path (with SubFolder).
Existing folders are overwrited.
|
CreatePreviewImage(Size) |
Preview image is created from outline with drills. Simple without special pads and only one drill layer.
The image will be created of the loaded job, if no job is loaded the return bitmap is black.
It will use the current step for pcb outline and drills.
|
CreatePreviewImage(Size, Boolean, Boolean, String) |
Preview image is created from outline with drills. Simple without special pads and only one drill layer.
The image will be created of the loaded job, if no job is loaded the return bitmap is black.
It will use the current step for pcb outline and drills.
|
Dispose |
Dispose the IPCBIWindow!
|
FireOnJobLoadedEvent |
When a design is imported via a plugin, the plugin should call this function when the import is finished, to inform all other plugins and pcbi that the ddata is now complete
Some plugins may then refill lists (e.g. with all components or nets)
|
FireRequestSetCursor |
Requests the change of the cursor for the main window
|
GenerateNetList |
Generate Net List with option to override existing nets and add components.
|
GetActiveMouseTool |
Returns the active mouse tool type
|
GetAllLoadedPlugIns |
Create a list of all loaded plugins with name of plugins as keys.
|
GetBoardHeight |
Get height of board (from attribute).
|
GetCurrentDrawSetting |
Get current draw setting without layers from this window.
|
GetCurrentPicture |
Creates a image of the visible area in the PCB-Investigator graphic pane.
|
GetCurrentRuleSets |
Load all settings for all available analysis plugins.
|
GetCurrentStep |
Return the current step, which is selected in PCB-I.
|
GetDrawingWindow |
Returns handle to the PCB-Investigator graphic pane
|
GetJobBounds |
Get the bounds of the job/profil.
|
GetJobInfo |
Get information of job, details of selection, components and repeats.
|
GetJobInformation |
Creates an class with all relevant job information.
|
GetJobName |
Get the name of the job, if it is loaded from zip/tgz the real name is given back not the temporary unpacked name.
|
GetJobPreviewImages |
Returns the Preview and Icon Image of the currently loaded design
|
GetLoadedDataFormat |
Returns the data format of the currently loaded data set
|
GetMatrix |
Gets the matrix from the Job.
|
GetMPNPackageList |
Return the MPNPackageList of the currently loaded design or null
|
GetNetMode |
Get the current net mode.
|
GetObjectCountToCopy |
Count elements in copy list for pasting later.
|
GetODBJobAnalysisResultDirectory | |
GetODBJobDirectory |
Returns the full path of the job.
Use toLowerInvariant() for compaires, because the path is like on HDD with big and small chars.
|
GetPlugInInstance |
Check for the type, if the type is loaded and a instance is created the plugin will be returned.
|
GetRuleSetting |
Load rules for PlugIn (Each plugin have his own container). Analsysis scripts are alle manged over scripting, if you change the Name from PCB-Investigator-Scripting to other name it do not find the analysis script settings again.
|
GetStandardRuleSets |
Ask all plugins for there standard rules and combine them in one rulesSet.
|
GetStep |
Return the Step with the choosen name or null if the name does not exist.
|
GetStepList |
Return a list with all used steps.
|
GetUnit |
The actual unit in PCB-Investigator window is mm.
|
GetVisibleArea |
This methode calculate the visible area in PCB-Investigator.
|
GetVisibleAreaD |
This methode calculate the visible area in PCB-Investigator.
|
GetZoom |
After you draw a picture (in IStep) you can get the zoom from the last plotted picture.
|
ImportRuleSets |
Import setting from xml file.
|
IsEditDialogOpen |
Returns true if the some Objects are in Edit mode
|
LoadData(String, IPCBIWindowLoadInformation) |
Load data from all available formats (depending on your license).
|
LoadData(String, Boolean) |
Load data from all available formats (depending on your license).
|
LoadData(String, IPCBIWindowLoadInformation, FormatTypes) |
Load data from all available formats (depending on your license).
|
LoadDataAsync |
Load data async from all available formats (depending on your license).
|
LoadDataAsync2(String) |
Load data async from all available formats (depending on your license).
|
LoadDataAsync2(String, Boolean) |
Load data async from all available formats (depending on your license).
|
LoadDataAsync2(String, Boolean, Boolean) |
Load data async from all available formats (depending on your license).
|
LoadDataFrom7ZStreamAsync(Stream) |
Load 7z data from stream e.g. use MemoryStream with 7z as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.7z", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFrom7ZStreamAsync(memStream);
}
|
LoadDataFrom7ZStreamAsync(Stream, ListFormatTypes) |
Load 7z data from stream e.g. use MemoryStream with 7z as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.7z", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFrom7ZStreamAsync(memStream);
}
|
LoadDataFromRARStreamAsync(Stream) |
Load rar data from stream e.g. use MemoryStream with rar as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.rar", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFromRARStreamAsync(memStream);
}
|
LoadDataFromRARStreamAsync(Stream, ListFormatTypes) |
Load rar data from stream e.g. use MemoryStream with rar as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.rar", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFromRARStreamAsync(memStream);
}
|
LoadDataFromTGZStreamAsync(Stream) |
Load tgz data from stream e.g. use MemoryStream.
|
LoadDataFromTGZStreamAsync(Stream, ListFormatTypes) |
Load tgz data from stream e.g. use MemoryStream.
|
LoadDataFromZipStreamAsync(Stream) |
Load zip data from stream e.g. use MemoryStream with zip as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.zip", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFromZipStreamAsync(memStream);
}
|
LoadDataFromZipStreamAsync(Stream, ListFormatTypes) |
Load zip data from stream e.g. use MemoryStream with zip as byte[] included.
You can use folowing code to try it out:
using (FileStream dataStream = new FileStream(@"D:\Daten\odb.zip", FileMode.Open))
{
MemoryStream memStream = new MemoryStream();
await dataStream.CopyToAsync(memStream);
memStream.Seek(0, SeekOrigin.Begin);
bool res = await window.LoadDataFromZipStreamAsync(memStream);
}
|
LoadODBJob(String) |
Read an ODB Job directory or ZIP/TGZ-ODB-Directory, returns false if the files not right or the path not right.
|
LoadODBJob(String, Boolean, Boolean) |
Read an ODB Job directory or ZIP/TGZ-ODB-Directory, returns false if the files not right or the path not right.
|
MouseToolDisabled |
Disable active mouse tool and change to default cursor (without selection, zoom...).
|
MouseToolEnabled |
Enable last mouse tool (it remembers last disable call).
|
OpenCAMInputAndSetListOfFiles |
Lists Gerber, Excellon and Sieb and Meyer Files in the CAM input.
|
OpenCAMInputWithFileFromDirectory |
Open CAM input and lists all Files on the window.
|
OpenChangeEdition |
Opens the dialog for changing edition licenses
|
OpenJobLibrary |
Opens the Job Library Dialog. If the "regID" is a registered Commend of an "IPluginOpenDesign" plugin, the corresponding Tabpage of the "IPluginOpenDesign" is initially shown.
|
OpenLicenceDialog |
Opens the dialog for adapting the licence
|
OpenPropertyOfComponent(ICMPObject) |
Show Component Properties from Component.
|
OpenPropertyOfComponent(InterfaceCMPObject) |
Show Component Properties from Component.
|
PasteOnLayer |
Paste the copyed items on the choosed layer.
|
Print |
Call print with last settings.
|
SaveDataInZipStreamAsync |
Save ODB++ data in zip stream. The memory stream can be corrupted if a error occurs (Check error log for this case).
|
SaveEmbedded |
This Methode save an embedded PCB-Investigator job in an directory.
|
SaveEmbeddedAsZIP(String) |
This Methode save an embedded PCB-Investigator job as ZIP file.
|
SaveEmbeddedAsZIP(String, String) |
This Methode save an embedded PCB-Investigator job as ZIP file.
|
SaveJob |
Save changes (only layers with changes).
|
SaveJob(String) |
Save Job in Directory.
|
SaveJob(String, Boolean) |
Save Job in Directory.
|
SaveJob(String, Boolean, String) |
Save Job in Directory with option to do it as zip compressed directory.
|
SaveJobAsync |
Save changes asynchronous (only layers with changes).
|
SaveJobImperative |
Save Job with all opened layers, attributes, nets and packages.
|
SaveRuleSettings |
Save rule settings for all analysis plugins.
|
SendMessage |
Send a message to other plugin with information what to do.
|
SetJobName |
Set name of job for misc file.
|
SetPrintingMargins |
Set Margins without print setup dialog.
|
SetRibbonMenu |
Set your own menu to PCB-Investigator, the xml file must be placed as memory stream.
|
SetRuleSetting |
Set rules for one plugin with the RulesContainer.
|
Show |
Shows the PCBI-Window.
Notice: The first show initialize the controlls and clears the selection and put the view to default.
|
ShowAddFeatureDialog |
Open add feature dialog with specific layer name.
|
ShowAndCreatePackageDefinition |
Show dialog to create own package definitions or load them from your libraries.
|
ShowAndCreatePackageDefinitionNonModal |
Show dialog to create own package definitions or load them from your libraries.
|
ShowAndCreateSymbolDefinition(IODBObject) |
Show dialog to create own standard tool definitions. It is possible to create all standard elements with this symbol dialog.
|
ShowAndCreateSymbolDefinition(IODBObject, String) |
Show dialog to create own standard tool definitions. It is possible to create all standard elements with this symbol dialog.
|
ShowAndGetPartDefinition |
Show dialog to create own part definitions or load them from your libraries.
|
ShowNotesDialog |
Show notes dialog for edit and switch between notes.
This does not close the open dialog!
|
ShowNotesDialog(String, String) |
Show notes dialog for edit and switch between notes and initialize a new note.
This does not close the open dialog!
|
ShowPackagePropertyDialog |
Shows a dialog with properties/attributes from the given IPackageSpecificsD
|
ShowSearchAndStartIt |
Show search dialog and start search with this values.
|
ShowStatusText |
Show the text in status bar. After 1 second it will be cleaned.
|
UpdateControlsAndResetView |
Update layer list, stepcontrol and zoom home.
Important after working in other threads and add extra controls like tabpages or menus.
|
UpdateSelection |
fire change selection event
|
UpdateView |
If you use PCB-Investigator and control it from outside, then you have to update the view after each action.
|
WorldToClient(PointD) |
Calculate world to client coordinates.
|
WorldToClient(PointF) |
Calculate world to client coordinates.
|
ZoomHome |
ZoomHome set the view in PCB-Investigator to the main rectangle view.
|
ZoomProfile |
ZoomProfile set the view in PCB-Investigator to the profile bounds.
|
ZoomRect(RectangleD) |
ZoomRect set the view in PCB-Investigator to the rectangle (if the rectangle side ratio does not apply to the window size PCB-Investigator make the view bigger).
|
ZoomRect(RectangleF) |
ZoomRect set the view in PCB-Investigator to the rectangle (if the rectangle side ratio does not apply to the window size PCB-Investigator make the view bigger).
|
ZoomRect(RectangleD, Boolean) |
ZoomRect set the view in PCB-Investigator to the rectangle (if the rectangle side ratio does not apply to the window size PCB-Investigator make the view bigger).
|
ZoomToSelection |
Zoom to selected objects.
|
ZoomToSelection(Boolean) |
Zoom to selected objects.
|