BackgroundColor | default Value is Color.Black |
BoardColor | Set the color to fill PCB (activate it with UseBoardColor). |
CMP_TransparyLevel | The inner color transpary of CMPs (alpha level between 0 and 255). |
ColorMix | for drawing lighter or darker (default is XOR) |
ComponentInsertPointUnitFactor | The unit factor for calculating the package insert point. The insert point is most in the middle of the package. You see the insert point marked with a small yellow circle inside of the package outline. e.g. 39.37f = mm; 1 = mils |
ComponentLabelColor | Option to get or change component label color. |
ComponentLabelType | The type of information, which is labeled into the component This is saved in options and PCB-Investigator remembers last setting. Value can only be used after creating an IPCBIWindow instance. |
DrawMode | Same as in PCB-Investigator (default is IDrawMode.Filled) |
DrawNegativeLayersInverted | Draws layers with negative polarity inverted (not in Outline Mode, and not when DrawOnlySelected is on) Value can only be used after creating an IPCBIWindow instance. |
DrawOnlySelectedCMPs | if DrawOnlySelected is true, all Elements of the Rest are transparent (default is false) |
DrawOnlySelectedElements | if DrawOnlySelected is true, all Elements of the Rest are transparent (default is false) |
DrawStepsFlattedForAllSubsteps | Show all substeps or only first one. |
DrillMixedColor | Drill Tool Mixed Color setting, change for easy finding of drills. Value can only be used after creating an IPCBIWindow instance. |
HighlightFirstPinOfCMPs | The first pin is drawn with transparent color, if you want to turn off this set the value to false. This is saved in options and PCB-Investigator remembers last setting. Value can only be used after creating an IPCBIWindow instance. |
HighlightPolarityPin | The polarity pin is drawn with color, if you want to turn off this set the value to false. This is saved in options and PCB-Investigator remembers last setting. Value can only be used after creating an IPCBIWindow instance. |
IfDrawOnlySelectedTransparencyNotSelectedCMPs | Transparency level in percent for Components, default value 0. |
IfDrawOnlySelectedTransparencyNotSelectedElements | Transparency level in percent, default value 50. |
InfoColor | default Value is Color.White, this color is used for many details e.g. measure line or note text |
MaxCountActiveLayers | Limit count of active layers in PCB-Investigator. |
MPNPackageBodyColor | Color for MPN Package Bodys |
MPNPackagePinColor | Color for MPN Package Pins |
PolarityPinColor | Color for Polarity Pins |
ProfileColor | default Value is Color.White, this change the board profile line color |
SelectionColor | default Value is Color.White is only used if you deactivate the HatchMode. |
SelectionHatchMode | The SelectionHatchMode is for set the Selected Style. |
ShowFilledSurfaces | Draw only outline of surfaces or fill them. (Fill is default, reset after loading new project to fill(true)) |
ShowMPNPackageBody | If true, the MPN Package Body is drawn if exists (with MPNPackageColor) |
ShowMPNPackagePinLabel | If true, the MPN Package Pin Labels are drawn if exists (with MPNPackageColor) |
ShowMPNPackagePins | If true, the MPN Package Pins are drawn if exists (with MPNPackageColor) |
ShowPinLabel | Show pin information or not. |
ShowPinNumbers | Show pin information on components or not. |
ShowPinSpecialInfo | Get or set special pin info for components. This overwrites UseGeometryPinNames and set it instead of. |
ShowTransparentSurfaces | Surfaces in transparent mode are hidden by default; you can change this by using ShowTransparentSurfaces or ask for the value if it is changed. |
ShowZones | ODB ++ v8.1 defines zones (e.g. for specific heights), you can show them with this property. |
UseAdvancedLayerColors | Use advanced layer colors, you can set colors by layername. |
UseBoardColor | Fill PCB with color. |
UseGeometryPinNames | Pins has two different name types, from geometry (default) or from component. |
UseHatchMode | Draw function uses SelectionColor if UseHatchMode is false. |
UseMatrixColors | Use colors from matrix (odb attributes). |
UseStackupOrderForDrawing | Draw layers always in stackup definition order. |